SATO TG308, Service Manual

Page: 87 / 252

Section 4: Operation and Configuration
TG3 Series Service Manual
Page 4-47
4.12 TEST PRINT MODE
(
Cont’d)
2)
Second piece
-- Sensor information, setting values in Service Mode, VR (Potentiometer), offset values for
each paper type will be printed.
Item name to be printed Description
Firm Date Created date of firmware.
Print format is indicated by the last 2 digits of the year, month and
day.
Life Counter Printed life expectancy in “m” scale.
Head Counter 1
Head Counter 2
Head Counter 3 Print head life expectancy in “m” scale.
Cutter Counter The number of times in which paper was cut.
Head-Check [All] Checks print head condition and prints its result.
If print head fails the test, its result, “NG”, will be indicated in
reverse colors.
S/N Serial number of printer. CODE39 barcode will be printed on the
following line.
CONT S/N Serial number of CONT board (Main PCB). CODE39 barcode will
be printed on the following line.
Main PCB Revision CONT board (Main PCB) version. CODE39 barcode will be printed
on the following line.
I/F Board Revision Interface version. CODE39 barcode will be printed on the following
line.
Reflective Sensor
Low [Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
This information will be printed when reflective sensor is enabled.
If “Low” is not [Low < 1.0], “Low” will be indicated in reverse colors.
If “High” is not [0.8 < (High-Low)], “High” will be indicated in reverse
colors.
Transmissive Sensor
Low [0.2<Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
This information will be printed when transmissive sensor is
enabled.
If “Low” is not [0.2 < Low < 1.0], “Low” will be indicated in reverse
color.
If “High” is [0.8 < (High-Low)], “High” will be indicated in reverse
colors.
Item name to be printed Description
Reflective Sensor
Low [Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
This information will be printed when reflective sensor is enabled.
If “Low” is not [Low < 1.0], “Low” will be indicated in reverse colors.
If “High” is not [0.8 < (High-Low)], “High” will be indicated in reverse
colors.