SATO TG308, Service Manual

Page: 91 / 252

Section 4: Operation and Configuration
TG3 Series Service Manual
Page 4-51
4.12 TEST PRINT MODE
(
Cont’d)
4.12.9 Explanation of the contents of each pieces of Factory Test Print (Small size)
Below are Factory Test print samples (Small Size). Printed contents are subject to change without notice and
the values are depends on individual settings.
Item name to be printed Description
FROM2 CHECK SUM Extended memory, LCD data, UNICODE conversion table, check-
sum value of TTF header area, and CODE39 barcode. Note that
checksum value may change by destination.
FROM3 CHECK SUM Checksum value of TTF/outline font and CODE39 barcode.
Checksum value when TTF/outline font is not registered will be
“0000”.
Note that checksum value may change by destination.
FROM4 CHECK SUM Checksum value of Kanji ROM and CODE39 barcode. Note that
checksum value may change by destination.
Checksum value without Kanji ROM will be “0000”.
First piece
Second piece
Third piece