SATO TG308, Service Manual

Page: 68 / 252

Section 4: Operation and Configuration
Page 4-28
TG3 Series Service Manual
4.9 ADVANCED MODE (Cont’d)
ADVANCED MODE
Menu Description
Setting the display language on LCD.
The display language differs by location that the printer was purchased.
The initial value is ENGLISH.
If the purchased destination is in China (EX4) or Korea (EX6), BITMAP KANJI
menu will display after
FEED
button is pressed.
If the purchased destination is in US (EX1) or Europe (EX2), EURO CODE
menu will display after
FEED
button is pressed.
Selecting Bitmap Kanji.
The available Kanji differs by destination.
Display language indicated by “*” is the initial selection.
This menu lets you select the symbol for representing the Euro mark (currency
symbol).
The initial value is D5.
The ESC sequence in SBPL commands can be defined as standard (using
non-printable code 1BH) or non-standard (some other user code).
The initial value is STANDARD.
To set non-standard code, send the user download command <LD> in Normal
Mode. For more details on the <LD> command, refer to the Command Specifi-
cations.
Destination Display language
US (EX1) English only
Europe (EX2) French, German, Spanish,
Italian, Portuguese or
English
China (EX4) English only
Korea (EX6) Korean or English
Destination Display language
China Japanese or Chinese*
Korea (EX6) Chinese or Korean*