SATO TG308, Service Manual

Page: 66 / 252

Section 4: Operation and Configuration
Page 4-26
TG3 Series Service Manual
4.9 ADVANCED MODE (Cont’d)
1.
During Offline mode, press
FUNCTION
button to display the operational icon menu. Press
arrow
buttons
to select ADVANCED MODE.
2.
When ADVANCED MODE is displayed, press the
FEED
button to enter Advanced mode for adjustment.
Note:
PASSWORD may prompt on the display if SET PASSWORD is set to ON in the Service mode. Please
refer to
Section 4.15 Service Mode
for details on how to enter password.
3.
DARKNESS RANGE is first displayed. Press the
FEED
button repeatedly will switch to the next setting
options as shown above. To return to the previous setting option, press
ONLINE
button.
4.
When the desired setting option is displayed, press
arrow
buttons to select the item or to set the value and
then press
FEED
button to save the setting.
ADVANCED MODE
Menu Description
Setting print darkness range.
Available options are from A to F, with F being the darkest density.
Only supported range is displayed.
The initial setting is at A.
Note
: Adjustment of this setting is usually unnecessary.
Setting print method to thermal transfer or direct thermal.
TRANSFER
: Thermal transfer
DIRECT
: Direct thermal
The initial value is TRANSFER.
The printer can perform the pitch size check of the loaded media if the A1 com-
mand, which fixed the size of the media, is sent to the printer. If the printer
detected the media size has fallen out of the range of ± 0.1” (2.5 mm) from the
set pitch size, MEDIA ERROR will be displayed.
ENABLE
: Paper size check is ON
DISABLE
: Paper size check is OFF
The initial value is DISABLE.
Enabling/ Disabling the display of command error.
This setting determines the printer motion when detecting a command error.
YES
: Stops printing operation when command error is occurred.
NO
: Displays a warning icon and continues printing operation.
The initial value is NO.
The printer can be set to go into ONLINE mode automatically after feeding the
media automatically. Otherwise, the printer starts in the OFFLINE state.
YES
: The printer goes online after feeding the paper automatically.
NO
: The printer goes offline after feeding the paper automatically.
The initial value is YES.