SATO TG308, Service Manual

Page: 64 / 252

Section 4: Operation and Configuration
Page 4-24
TG3 Series Service Manual
4.7 INTERFACE MODE (Cont’d)
4.8 SEMBL MODE
1.
During Offline mode, press
FUNCTION
button to display the operational icon menu. Press
arrow
buttons
to select SEMBL MODE.
2.
When SEMBL MODE is displayed, press the
FEED
button to activate the SEMBL operation.
3.
START PROGRAM is first displayed. Press the
arrow
buttons to specify the start-up program.
NONE
: Not specifying start -up program
XXXXXXXX.BAS
: Specifying startup program
Program names stored in the main memory will appear in XXXXXXXX.BAS.
The initial value is NONE.
RS-232C CONFIGURATION
Menu Description
Set item number check function.
ENABLE
: Item number check is ON
DISABLE
: Item number check is OFF
The initial value is DISABLE.
This screen is displayed only when PROTOCOL is set to STATUS5.
Set BCC check function.
ENABLE
: BCC check is ON
DISABLE
: BCC check is OFF
The initial value is DISABLE.
This screen is displayed only when PROTOCOL is set to STATUS5.
Setting receive buffer type.
This screen is displayed only when PROTOCOL is set to READY/BUSY or
XON/XOFF.
The initial value is 1ITEM.
FEED
button
ONLINE
button
FEED
button
ONLINE
button
FUNCTION
button
Displaying registered
program name
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.