Section 2: Basic Specifications
Page 2-2
TG3 Series Service Manual
MEDIA
(Be sure to use media manufactured or certified by SATO)
Size
Label
Tag
Continuous
Cutter
Continuous
Cutter
Width:
0.9” to 3.1” (22 to 80 mm)
Width including liner:
1.0 to 3.3” (25 to 83 mm)
Pitch:
0.6” to 9.3” (16 to 237 mm)
Pitch including liner:
0.7” to 9.4” (19 to 240 mm)
Width:
0.9” to 3.1” (22 to 80 mm)
Width including liner:
1.0” to 3.3” (25 to 83 mm)
Pitch:
0.9” to 9.3” (22 to 237 mm)
Pitch including liner:
1.0” to 9.4” (25 to 240 mm)
Width:
1.3” to 3.3” (32 to 83 mm)
Pitch:
1.0” to 9.4” (25 to 240 mm)
Width:
1.3” to 3.3” (32 to 83 mm)
Pitch:
1.0” to 9.4” (25 to 240 mm)
* The size may be limited by use conditions.
Type
Direct Thermal/ Thermal Transfer
Use roll media specified by SATO.
Roll Diameter
Maximum outer diameter: 10” (250 mm)
Core Diameter
Inner core diameter: 3” (76.4 mm) and 4” (102 mm),
depending on media type
*The supplied boss is required for loading 4” (102 mm) roll core.
Thickness
Label: 0.006 to 0.01 in. (0.14 to 0.265 mm)
Tag: 0.006 to 0.013 in. (0.157 to 0.33 mm)
*For details on support for RFID tags, please contact your nearest SATO reseller or
technical support center.
Wind Direction
Face-out/ Face-In
RIBBON
(Be sure to use ribbon manufactured or certified by SATO)
Width
Max. 3.3” (84 mm)
Length
Max. 1476.3 ft. (450 m) (Depending on ribbon type)
Wind Direction
Face-out/ Face-In
Winding Method
Coreless roll (Standard), Rolled onto a core (Option)
PROCESSING
CPU
32 Bit RISC-CPU 100MHz
Flash ROM
8 Megabytes
SDRAM
16 Megabytes
PRINTER LANGUAGE
Standard
SATO Barcode Printer Language (SBPL)
Summary of Contents for TG308
Page 1: ...Service Manual For printer model TG3 Series www satoamerica com PN 9001226 A...
Page 6: ...Table of Contents Page iv TG3 Series Service Manual This page is intentionally left blank...
Page 7: ...Section 1 Introduction TG3 Series Service Manual Page 1 1 INTRODUCTION...
Page 251: ...Section 9 Sato Group of Companies TG3 Series Service Manual Page 9 1 SATO GROUP OF COMPANIES...