Section 4: Operation and Configuration
Page 4-56
TG3 Series Service Manual
4.13 DEFAULT SETTING MODE
The printer can be reset to the default setting as in the factory preset.
1.
Make sure the Power of the printer is turned off (O).
2.
While pressing the
ONLINE
button and the
FEED
button simultaneously, switch the Power to On ( I ).
3.
The printer enters DEFAULT SETTING mode.
DEFAULT SETTING MODE
Menu
Description
Select the item to be initialized.
PRINTER SETTING
: Initializing printer setting
ALT. PROTOCOL
: Initializing protocol code
The initial setting is PRINTER SETTING.
When PRINTER SETTING is selected, the printer displays the DEFAULT
PRINTER SETTING confirmation menu.
When ALT. PROTOCOL is selected, the printer displays the DEFAULT ALT.
PROTOCOL confirmation menu.
DEFAULT PRINTER SETTING confirmation menu.
Selecting YES and pressing
FEED
button will initialize the printer setting.
The initial value is NO.
If NO, it goes to DEFAULT SETTING without initializing the printer setting.
DEFAULT ALT. PROTOCOL confirmation menu.
Selecting YES and pressing
FEED
button will initialize protocol code.
The initial value is NO.
If NO, it goes to DEFAULT SETTING without initializing protocol code.
ONLINE or
FUNCTION button
Select ALT.PROTOCOL
+ FEED button
Press FEED button
+ Switch Power to On “ I ”
Select PRINTER SETTING
+ FEED button
Select YES +
FEED button
Select NO +
FEED button
* Press , , or button to select
item accordingly. The active arrow
icons are displayed on the screen.
Summary of Contents for TG308
Page 1: ...Service Manual For printer model TG3 Series www satoamerica com PN 9001226 A...
Page 6: ...Table of Contents Page iv TG3 Series Service Manual This page is intentionally left blank...
Page 7: ...Section 1 Introduction TG3 Series Service Manual Page 1 1 INTRODUCTION...
Page 251: ...Section 9 Sato Group of Companies TG3 Series Service Manual Page 9 1 SATO GROUP OF COMPANIES...