Section 4: Operation and Configuration
TG3 Series Service Manual
Page 4-49
4.12 TEST PRINT MODE
(
Cont’d)
Item name to be printed
Description
Zero Slash
The validity of slashed zero.
When using a slashed zero, “On” will be printed. If not, “Off” will be
printed.
JIS Code
JIS code setting.
When JIS code is set, “JIS” will be printed.
When SJIS code is set, “SJIS” will be printed.
Kanji Font
Kanji font setting.
For Mincho type, “Mincho” will be printed. For Gothic type, “Gothic”
will be printed.
Note that this will be printed when using Japanese printer model
only.
Character Pitch
Character pitch setting.
For proportional pitch, “Proportional” will be printed.
For fixed pitch, “Fixed” will be printed.
Print Method
Print method.
For thermal transfer printing, “Thermal Transfer” will be printed.
For direct thermal printing, “Direct Thermal” will be printed.
Reflective Sensor
Low [Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
This information will be printed when reflective sensor is enabled.
If “Low” is not [Low < 1.0], “Low” will be indicated in reverse colors.
If “High” is not [0.8 < (High-Low)], “High” will be indicated in
reverse colors.
Transmissive Sensor
Low [0.2<Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
This information will be printed when transmissive sensor is
enabled.
If “Low” is not [0.2 < Low < 1.0], “Low” will be indicated in reverse
color.
If “High” is [0.8 < (High-Low)], “High” will be indicated in reverse
colors.
Head Check
The setting of head check function.
“None” will be printed when this function is off. When this function
is enabled and checking the actual printable area, “Normal” will be
printed.
For checking barcode print area, “Barcode” will be printed.
Check P-Size
The setting of paper size check function.
“Enabled” will be printed when this function is on. If not, “Disabled”
will be printed.
Calendar
Calendar display. If calendar IC is not installed in the printer,
“None” will be printed.
Calendar format is indicated by year, month, day, hour and minute.
Calendar Check
The setting of calendar check.
“Enabled” will be printed if calendar check is on. If not, “Disabled”
will be printed.
Note that this information will not be printed without installing the
calendar IC.
Summary of Contents for TG308
Page 1: ...Service Manual For printer model TG3 Series www satoamerica com PN 9001226 A...
Page 6: ...Table of Contents Page iv TG3 Series Service Manual This page is intentionally left blank...
Page 7: ...Section 1 Introduction TG3 Series Service Manual Page 1 1 INTRODUCTION...
Page 251: ...Section 9 Sato Group of Companies TG3 Series Service Manual Page 9 1 SATO GROUP OF COMPANIES...