SATO TG308, Service Manual

Page: 82 / 252

Section 4: Operation and Configuration
Page 4-42
TG3 Series Service Manual
4.12 TEST PRINT MODE
(
Cont’d)
4.12.2 Test Print List of Barcodes
Barcodes supported by this printer will be printed as shown below. Barcodes to be printed may differ
depending on the test print size.
Item name to be printed Description
RFID Current Counter The number of succeeded/ failed RFID tag writes and the total tag
count. Note that the count after reset or [CLEAR RFID COUNT] will
be shown in this item.
RFID Success or Success The number of RFID tags successfully written.
RFID Failure or Failure The number of RFID tag write failures.
RFID Total or Total The number of RFID tag writes.
(Sum of write successes and failures)
Module RFID module name
RFID Setting Section header of RFID setting.
Max Error Count The counter for void and reprint RFID tags at the time of write fail-
ure.
RFID I/O Base Data format when writing to RFID tag.