SATO TG308, Service Manual

Page: 109 / 252

Section 4: Operation and Configuration
TG3 Series Service Manual
Page 4-69
4.16 FACTORY MODE (Cont’d)
1.
When MAINTENANCE MODE is displayed, press
/ arrow
buttons and then
FEED
button to enter FAC-
TORY MODE.
2.
Pressing
FEED
button repeatedly will switch to the next setting option as shown above. To return to the
previous setting option, press
ONLINE
button.
3.
When the desired setting option is displayed, press
arrow
buttons to select the item or to set the value and
then press
FEED
button to save the setting.
FEED button
ONLINE button
FEED button
ONLINE button
Press , or PAPER
button to select the paper
type.
Press CUTTER button to
set the cutter motion.
Test print
FEED button
FEED
button
ONLINE button
FEED button
ONLINE button
or
button
Select this item to enable
batch separator when
using tag as paper type.
FEED button
ONLINE button
Continued from INTERFACE BOARD
REVISION screen on the previous page
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
* Pressing FUNCTION button on each
screen will revert to MAINTENANCE
MODE menu.
Select YES +
FEED button
FUNCTION
button
FUNCTION
button
FUNCTION
button
Return to MAINTENANCE
MODE menu
FUNCTION
button
Select NO +
FEED button