SATO TG308, Service Manual

Page: 110 / 252

Section 4: Operation and Configuration
Page 4-70
TG3 Series Service Manual
4.16 FACTORY MODE (Cont’d)
FACTORY MODE
Menu Description
Resetting a counter in the printer.
The 6 items below are selectable.
NONE..................No reset
ALL......................Printer settings and all of the counters are reset.
COUNTERS..........Reset all of the counters.
LIFE.....................Reset only life counter.
HEAD...................Reset only head counter.
CUT......................Reset only cut counter.
Press
/ arrow
buttons to move cursor, and then press
FEED
.
The initial value is NONE.
Use this to display the value of counters in the printer.
You can select from the four below items:
NONE.....None displayed
LIFE........Displays the life counter
HEAD......Displays the head counter
CUT.........Displays the cut counter
Press
/ arrow
buttons to move cursor, and then press
FEED
.
Initial value is NONE.
Use this to display the value of the life counter in the printer.
To exit, press
FEED
or
ONLINE
.
Use to show value of head counter in the printer.
To exit, press
FEED
or
ONLINE
.
Use this to show the value of the cut counter in the printer.
To exit, press
FEED
or
ONLINE
.
Use this to adjust the LCD screen brightness and darkness.
Press
/ arrow
buttons to enter value, and then press
FEED
.
You cannot clear the setting by resetting the counter.
Press
FEED
to save the set value and go to SERIAL NO.
Press
ONLINE
to go to COUNTER DISPLAY without saving the set value.
Enter the serial number here.
Use the
/ arrow
buttons to move the cursor.
Enter the serial number using the
/ arrow
buttons, and press
FEED
to set
the number.
The initial value is 00000000.
Assignable characters are 0 to 9 and A to Z.
You cannot clear the setting by resetting the counter.