SATO TG308, Service Manual

Page: 78 / 252

Section 4: Operation and Configuration
Page 4-38
TG3 Series Service Manual
4.12 TEST PRINT MODE
(
Cont’d)
4.12.1 Explanation of the contents of each piece of Configuration Test Print
Below are Configuration Test print samples. Printed contents are subject to change without notice and the
value depends on individual settings.
1)
First piece
-- Setting values in both User Mode and Advanced Mode, sensor information and DSW
information will be printed.
Item name to be printed Description
Print Speed or Speed Print speed.
Print Darkness or Darkness Print darkness and darkness range settings.
Print Offset H or H-Offset
Print Offset V or V-Offset Print offset value of base reference point.
H: Horizontal, V: Vertical
Zero Slash The validity of slashed zero.
When using a slashed zero, “On” will be printed. If not, “Off” will be
printed.
JIS Code JIS code setting.
When JIS code is set, “JIS” will be printed.
When SJIS code is set, “SJIS” will be printed.