SATO TG308, Service Manual

Page: 100 / 252

Section 4: Operation and Configuration
Page 4-60
TG3 Series Service Manual
4.15 SERVICE MODE
In SERVICE MODE menu, you can program various dimensional settings of the printer. Press
/ arrow
buttons to select SERVICE LEVEL, PITCH OFFSET, CUT OFFSET, BACKFEED OFFSET, LOADING
OFFSET or SETTING, and then press
FEED
button to enter the selected mode. Refer to the following
flowcharts of the settings and LCD display menus available in SERVICE MODE.
4.15.1 Overview of Sensor Level adjustment in Service Mode
1.
When SENSOR LEVEL is displayed, pressing the
FEED
button repeatedly will switch to the next setting
option as shown above. To return to the previous setting option, press
ONLINE
button.
2.
When the desired setting option is displayed, press
arrow
buttons to select the item or to set the value and
then press
FEED
button to save the setting.
FEED button
FEED
button
FUNCTION
button
FUNCTION
button
FUNCTION
button
FUNCTION
button
FUNCTION
button
Return to SERVICE MODE menu
FEED button
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
Select SENSOR LEVEL
+ FEED button
FEED button
ONLINE button
or
button
FEED button
or
button
ONLINE button
ONLINE button
FEED button
or
button
or
button
ONLINE button
ONLINE button
ONLINE button
FUNCTION
button