SATO TG308, Service Manual

Page: 103 / 252

Section 4: Operation and Configuration
TG3 Series Service Manual
Page 4-63
4.15 SERVICE MODE (Cont’d)
4.15.3 Cut Offset adjustment in Service Mode
CUT OFFSET MODE
Menu Description
Adjusting cut offset for each type of media.
Select a media type with
/ arrow
buttons.
Use
/ arrow
buttons to enter adjusted value.
“+” for moving the cut position forward.
“-” for moving the cut position backward, against paper feed direction.
The adjustment range is between ± 00 and 99 dots.
For the initial value of each media type and model, refer to the chart below.
FEED button
FUNCTION
button
Return to SERVICE MODE menu
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
Select CUT
FEED button
ONLINE button
Media Sensor TG308 TG312
Tag Center hole +00 +00
Side hole +00 +00
Edge +00 +00
I-Mark -12 -18
Label Gap -12 -18
I-Mark -36 -54
Others Not sensor +00 +00