SATO TG308, Service Manual

Page: 235 / 252

Section 8: Appendix
TG3 Series Service Manual
Page 8-5
8.3 OPTIONAL ACCESSORIES - KEYPAD
The optional keypad can be connected to the TG3 Series printer with the
Keypad
connection terminal, thus
providing a stand-alone function.
1.
Make sure that power cable is not connected to the
printer.
2.
Connect the cable from the optional Keypad device to
the
Keypad
connection terminal at the left side of the
Media ejection slot
of the printer.
Note:
Make sure the connector is correctly oriented. Secure
the printer with one hand, and insert the connector firmly.
3.
Set the printer for use with the connected device. Refer
to
Section 4.7 Interface Mode
and perform the
procedures to set the
Keypad CONNECT
to
ENABLE
.