SATO TG308, Service Manual

Page: 61 / 252

Section 4: Operation and Configuration
TG3 Series Service Manual
Page 4-21
4.7 INTERFACE MODE (Cont’d)
Setting of USB
USB CONFIGURATION
Menu Description
Select the communication protocol.
STATUS4 and STATUS5 are available for selection when USB interface
boards is installed.
The initial value is STATUS4.
When STATUS4 is selected, the printer will proceed directly to IGNORE CR/LF
menu.
When STATUS5 is selected, the printer will proceed to ITEM NO CHECK
menu.
Set item number check function.
ENABLE
: Item number check is ON
DISABLE
: Item number check is OFF
The initial value is DISABLE.
This screen is displayed only when PROTOCOL is set to STATUS5.
Set BCC check function.
ENABLE
: BCC check is ON
DISABLE
: BCC check is OFF
The initial value is DISABLE.
This screen is displayed only when PROTOCOL is set to STATUS5.
FEED
button
ONLINE
button
FEED
button
ONLINE
button
From INTERFACE
BOARD SETTING
screen
FEED button
FEED
button
ONLINE
button
Displayed only
when STATUS5
is set
Proceed to IGNORE
CAN/DLE screen of
INTERFACE MODE menu
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
* Pressing FUNCTION button on each
screen will revert to INTERFACE
MODE menu.