SATO TG308, Service Manual

Page: 80 / 252

Section 4: Operation and Configuration
Page 4-40
TG3 Series Service Manual
4.12 TEST PRINT MODE
(
Cont’d)
2)
Second piece
-- Interface setting and setting values such as print position will be printed.
Item name to be printed Description
JP9 JP9 on CONT board (Main PCB).
“0” must be selected for this setting.
Item name to be printed Description
I/F-1 Interface setting details.
If an interface is not connected, “----” will be printed.
I/F-2 Connection status with Keypad.
If the Keypad is connected, “Keypad” will be printed. If not, “-----”
will be printed.
Pitch (LCD) Print position specified via LCD display will be printed.
Offset (LCD) Cut position specified via LCD display will be printed.
Darkness (LCD) Print darkness specified via LCD display will be printed.