R&S NRP
Menu handling
1144.1400.12 3.7
E-2
Menu handling
The menus can contain up to eight menu items which are used to perform an action, open a dialog box
or set a parameter.
Perform action
Close
If the menu contains only one or two descriptive terms, an
action is performed directly.
Use hardkey to perform action
Preset
If the name of the action to be performed is shown in a
wide black field, you can start the action by pressing the
hardkey of the same name, e.g.
({Pre}set)
in this case.
Open dialog box
Mode…
If a menu item is followed by three dots “
…”,
it can be used
to open a dialog box to set a variety of parameters.
Set parameters
Relative
Off
On Reset
Parameter-setting options are presented in the menu. The
currently selected option is shown in inverse video. You
can select the option you want by pressing the left or right
side of the rocker switch.
Softkeys with dual assignments
Close | Expand
( )
Some softkeys are assigned two menu items. One is se-
lected by pressing the left-hand side of the rocker switch,
the other, the right-hand side.
The two menu items are separated by a vertical line.
