R&S NRP
Remote Control - Commands
1144.1400.12 6.17
E-3
:SWR
PC
SC
PC
SC
/
1
/
1
−
+
If the forward power of a wave is measured in the PC and the
reflected power in the SC, the measurement command yields the
standing wave ratio. The output unit is set to "One" (
UNIT:RAT
O
).
:REFLection
PC
SC
/
If the forward power of a wave is measured in the PC and the
reflected/transmitted power in the SC, the calculate block yields
the reflection coefficient/transmission factor of the DUT. The
output unit is set to "One" (
UNIT:RAT O
).
:RLOSs
PC
SC
/
log
20
10
−
If the forward power of a wave is measured in the PC and the
reflected or transmitted power in the SC, the calculate block
yields the return loss/transmission loss of the DUT.
This function principally yields the same result as the
:RATio
function. The only difference is the output unit which is
automatically set to
dB
by means of this command (
UNIT:RAT
DB
).
