R&S NRP
Remote Control - Commands
1144.1400.12 6.27
E-3
CALCulate[1..8]:MATH[:EXPRession]:CATalog?
Lists all supported calculation functions. All functions are sent in the form of strings which are allowed
as parameters for the
CALCulate[1..8]:MATH:EXPRession
command.
CALCulate[1..8]:RELative[:MAGNitude][?] <float_value>
This command determines a value that is used as a divisor (logarithmic subtraction) for all measured
values of the calculate block in the
CALC:REL:STAT ON
state. The unit of this value is equal to the unit
of the output value of the calculate block and is defined according to
Table 6-3
:
Table 6-3: Output unit of measured value of calculate block.
CALC:MATH?
CALC:REL:STAT OFF
CALC:REL:STAT ON
"(SENS
n
)"
DBM | W | DBUV
DB | DPCT | O
"(SENS
n
-SENS
m
)"
DBM | W | DBUV
DB | DPCT | O
"(SENS
n
+SENS
m
)"
DBM | W | DBUV
DB | DPCT | O
"(SENS
n
/SENS
m
)"
DB | DPCT | O
DB | DPCT | O
"SWR(SENS
n
,SENS
m
)"
O -
"REFL(SENS
n
,SENS
m
)"
O -
"RLOS(SENS
n
,SENS
m
)"
DB -
The value range depends on the current output unit of the measured value of the calculate block.
Unit of
measured
value
W DBM
DBUV
DPCT
DB O
Value range
-9.99999E5
..
9.99999E5
-120
..
90
-13.0103
..
196.897
-100
..
999.99
-200
..
200
-1E20
..
1E20
Unit:
Æ
Table 6-3
.
*RST value
:
0 DBM
or
0 DB
