Remote Control - Commands
R&S NRP
1144.1400.12 6.78
E-3
Bit
No.
Meaning
12
Sensor D Front/Rear
Indicates whether sensor D is connected at the front (bit is not set) or rear (bit is set) of the device.
13
Not used
14 Key
pressed
This bit is always set if a key on the front panel is pressed (CONDition) or was pressed (EVENt).
15
Bit 15 will never be used.
Questionable Status Register
This register contains information on questionable device states. Such states may occur when the
device is not operated in compliance with its specifications. The register can be read by the queries
STATus:QUEStionable:CONDition?
or
STATus:QUEStionable[:EVENt]?
.
Table 6-18: Meaning of bits used in the Questionable Status Register
Bit
No.
Meaning
0 to 2
Not used
3
Questionable Power Status Register summary bit
Corresponds to the summary bit of the Questionable Power Status Register.
4
Questionable Window Status Register summary bit
Corresponds to the summary bit of the Questionable Windows Status Register.
5 to 7
Not used
8
Questionable Calibration Status Register summary bit
Corresponds to the summary bit of the Questionable Calibration Status Register.
9 POST
Failure
The built-in test of the R&S NRP carried out automatically upon power-up has generated an error.
10 to
13
Not used
14 Warning
15
Bit 15 will never be used.
