R&S NRP
Measuring average power in defined time interval
1144.1400.12 2.23
E-2
2
Settings to ensure reliable triggering
(¶ MENU)
*
¾
Close
the
Mode
dialog box.
Trigger
…
–
( )
*
*
¾
Open
the
Trigger
dialog box.
The Timeslot mode provides not only the
Source
and
Level
parameters described in the section
)
Settings for reli-
able triggering but also the
Delay
parameter which is used
when the start of timeslot 1 (Frame Start) does not coin-
cide with to the trigger time.
¾
Delay
Define the start of timeslot 1 with reference to the
triggering edge. The value can be positive or nega-
tive.
9
Tip
The Scope display shows physical and delayed trig-
ger times in the form of a triangle so that
Delay
can be
interactively adjusted to the signal.
3
Simultaneous measurement in multiple timeslots.
–
( )
*
↔
*
¾
Change to the Windows menu.
¾
Use the rocker switch beside
Timeslot #
to view the
various timeslot values in the measurement window.
9
Tip
You can open a separate window for each slot and thus
display up to 4 timeslot values simultaneously.
