Management of settings (File menu)
R&S NRP
1144.1400.12 4.52
E-2
Programming aids
If you are developing remote control programs, you can display the contents of the SCPI error queue in
the Errorlist dialog box. In addition to the error, the command line that triggered the error is displayed,
along with a question mark highlighted in black at the point where the command interpreter detected the
error.
The dialog box can be left permanently open, and its contents are continuously updated.
File
menu:
Errorlist… –
( )
ä
ä
Fig. 4-46
Errorlist dialog box
If the device is already in the remote state, the menu bar is replaced and the Errorlist can be opened
with the topmost softkey.
–
( )
ä
ä
Fig. 4-47
Menu bar in the remote control mode
(DEL/1TRIG)
If the Errorlist is open, the error queue of the
R&S NRP can be deleted by pressing the
(DEL)
key.
Remote control
DISPlay:ERRorlist[?] ON | OFF
To activate extended error messages:
SYSTem:ERRor:EXTended[:STATe][?] <boolean>
Assigning names to windows
Each display window is automatically labelled with a number (1, 2, 3, 4). In addition, you can enter a
name for each window to more closely indicate the type of measurement result. This is particularly rec-
ommended for settings to be stored in a setup memory. The
Window Name
dialog box is used to assign
names to windows.
File menu
:
Window Name…
–
( )
ä
ä
Fig. 4-48
Window Name dialog box
File
Errorlist…
File
Window Name…
