Mitsubishi Electric MELSERVO MR-J3-xT, Instruction Manual

Page: 83 / 471

3 - 29
3. CC-LINK COMMUNICATION FUNCTIONS
Code No. Item
Writing data (RWwn+3) contents
(PLC Servo amplifier)
8801h
to
88FFh
Deceleration time constant data RAM command of point
table
Writes the deceleration time constants of point table No.
1 to 255 to RAM. These values are cleared when power
is switched off.
The decimal value converted from the 2 lower digits of
the code No. corresponds to the point table No. Convert the values into hexadecimal before making
setting.
8901h
to
89FFh
Dwell data RAM command of point table
Writes the dwell data of point table No. 0 to 255 to RAM.
These values are cleared when power is switched off.
The decimal value converted from the 2 lower digits of
the code No. corresponds to the point table No. Convert the values into hexadecimal before making
setting.
8A01h
to
8AFFh
Auxiliary function data RAM command of point table
Writes the auxiliary function data of point table No. 0 to
31 to RAM. These values are cleared when power is
switched off.
The decimal value converted from the 2 lower digits of
the code No. corresponds to the point table No. Convert the values into hexadecimal before making
setting.
8B01h
to
8BFFh
8C01h
to
8CFFh
Position data EEP-ROM command of point table
Writes the position data of point table No. 1 to 255 to
EEP-ROM. Written to EEP-ROM, these values are held
if power is switched off.
The lower 16 bits are written in even code and the upper
16 bits in odd code.
8B01h to 8BFF: Position data in under 16 bits of point
table No. 1 to 255
8C01h to 8CFF: Position data in upper 16 bits of point
table No. 1 to 255
Example
Instruction code 8B13: Under 16 bits of point table No.
19
Instruction code 8C13: Upper 16 bits of point table No.
19
Convert the values into hexadecimal before making
setting.
8D01h
to
8DFFh
Servo motor speed data EEP-ROM command of point
table
Writes the servo motor speeds of point table No. 1 to
255 to EEP-ROM. Written to EEP-ROM, these values
are held if power is switched off.
The decimal value converted from the 2 lower digits of
the code No. corresponds to the point table No. Convert the values into hexadecimal before making
setting.
8E01h
to
8EFFh
Acceleration time constant data EEP-ROM command of
point table
Writes the acceleration time constants of point table No.
1 to 255 to EEP-ROM. Written to EEP-ROM, these
values are held if power is switched off.
The decimal value converted from the 2 lower digits of
the code No. corresponds to the point table No. Convert the values into hexadecimal before making
setting.
8F01h
to
8FFFh
Deceleration time constant data EEP-ROM command of
point table
Writes the deceleration time constants of point table No.
1 to 255 to EEP-ROM. Written to EEP-ROM, these
values are held if power is switched off.
The decimal value converted from the 2 lower digits of
the code No. corresponds to the point table No. Convert the values into hexadecimal before making
setting.