Mitsubishi Electric MELSERVO MR-J3-xT, Instruction Manual

Page: 270 / 471

7 - 20
7. MR Configurator
Click the "OK" button to display the setting screen of the Single-step feed.
During the servo on, the confirmation window indicating that the next operation is in the stop status is
displayed.
After confirming that the operation is in the stop status, click the "OK" button.
b)
c)
d)
e)
g)
f)
a)
(1) Point table No. setting ( a) )
Enter the point table No. into the "Point table No." input field and press the enter key.
(2) Servo motor start ( b) )
Click the "Start" button to rotate the servo motor.
(3) Temporary stop of servo motor ( c) )
Press the "Pause" button to stop the servo motor temporarily.
(4) Servo motor stop ( c) )
Click the "Pause" button again during a temporary stop of the servo motor to clear the remaining moving
distance.
(5) Servo motor restart ( d) )
Click the "Restart" button during the temporary stop to restart the rotations for the remaining move distance.
(6) Move distance clear ( e) )
Click the "Remaining distance clear" during the temporary stop to clear the remaining move distance.