LiuGong CLG835H, Service Manual

Page: 242 / 764

3-30
Removal and Installation
January 24, 2017
Removal and installation of torque converter-gearbox system CLG835H
Installation of torque converter-gear box system
Reference picture Operation step
Tools required
(Remarks)
1. Wipe clean the drain plug of
gear box, and then install it
in the threaded hole of gear
box and tighten it with a
torque of 600±70Nm\
442.5±51.6 lbf•ft.
34# socket, 13#
socket,
pneumatic
impact wrench,
open-end 34#
fixed torque
spanner
2. Secure the torque converter
to its housing through
threaded holes with the steel
wire or ropes.
Danger: The torque con-
verter can slide freely on
the guide wheel seat. When
lifting up it, the torque con-
verter and its housing must
be secured firmly with the
steel wire or ropes, in order to
avoid personal injury due to
falling of torque converter.
Steel wire
3. Lift up the gear box assem-
bly onto the machine
through the lugs of gear box
assembly with the hoisting
device and ropes.
Sling
(2 tons)
P18T00048
P18T00049
P18T00050