8-34
Structure Function Principle
January 24, 2017
Monitoring system
CLG835H
Low pressure alarm pressure switch of
service braking
Test on pressure switch failures
1. Unplug the connector connected to pressure
switch in the rear frame harness;
2. Remove the pressure switch from the com-
plete machine;
3. Assess the action value of pressure switch
with pressure test bed, and its contact type is
normally closed with action value up to 9Mpa.
Wiring schematic diagram of braking
When parking brake switch is pressed down, connect pin 3 and 4. When brake pressure is less than
11MPa, the low pressure alarm switch of parking brake turns on and indicator turns on.
When brake pressure is less than 7MPa, control pressure switch of parking brake turns off, parking
brake valve is outage and tyre is locked by action of brake.
P18E00038
P18E00039
Summary of Contents for CLG835H
