LiuGong CLG835H, Service Manual

Page: 567 / 764

6-17
January 24, 2017 Removal and Installation
CLG835H Removal and installation of cab
Installation of accelerator control system
Installation of accelerator control system: install it by the opposite steps of removal.
Adjustment of accelerator control system
Normally, after the accelerator pedal is installed, the accelerator pedal can be operated smoothly and the
normal operating condition of engine can be guaranteed. For the cases that the accelerator pedal is diffi-
cult to operate, the accelerator pedal cannot reach its maximum position or accelerator pedal does not
return, check the installation procedures above until it can be operated smoothly.
Removal of electric appliance components in cab
The power of vehicle must be turned off before disassembling the electric appliance compo-
nents. The power (-) of the whole machine is disconnected when the negative switch is turned to
"O" (OFF). The power (-) of the whole machine is connected when the negative switch is turned to
"I" (ON).
P18C00031