LiuGong CLG835H, Service Manual

Page: 591 / 764

6-41
January 24, 2017 Removal and Installation
CLG835H Installation of the left door lock in cab
Installation of the left door lock in cab
6. Glass joint filler: bond the
color separation paper on
both sides of adjacent glass
edge, about 5mm away from
the glass edge, and keep
the spacing formed by color
separation papers on both
sides consistent from up to
down; Meanwhile, seal the
inside of glass joint with
color separation paper to
avoid rugged adhesive on
the back when filling
adhesive. After applying
adhesive, flatten with self-
made rubber plate.
Tool:
Seal
Technical requirements: The speed of applying adhesive shall be even and the triangular adhesive
bead shall be uniform without lumps or breakpoints. Insertion depth is 2mm. The rubber blocks shall not
be placed within the scope of 10cm from corner point. The block shall not separate the adhesive bead.
Flatten excessive glue of sheet metal side not receiving filler treatment, and no excessive adhesive
shall remain.
Before installing the left door lock, be sure that the machine is in parking brake state.
Figures Operation step Tools
P18C00084
Glass gap filling sealant: One
line each on left and right for
both front and rear glasses