LiuGong CLG835H, Service Manual

Page: 199 / 764

3-45
January 24, 2017 Removal and Installation
CLG835H Removal and installation of front axle assembly
Installation of front axle assembly
Reference picture Operation step
Tools required
(Remarks)
1. Take the front axle assembly
out of placed area with a
handling device, and posi-
tion it under its mounting
point.
2. Lift up the front axle assem-
bly with a hoist, and install it
on the frame.
3. Install the tightening bolts
and nuts and tighten them
with torque of 2035±170Nm\
1500.8±125.38 lbf•ft.
Sling(2 tons) 46#
socket,
pneumatic
impact wrench,
open-end 46#
fixed torque
spanner
4. Install the front axle brake
pipe and service brake
hose. Tightening torque:
37±2Nm\ 27.29±1.48 lbf•ft.
Open-fixed 24#
fixed torque
spanner
5. Lift up the tire with a hoist
and install it onto the axle,
and then install the rim nut
and tighten it to 600±60Nm\
442.5±44.25 lbf•ft.
Sling
(2 tons)30#
socket,
pneumatic
impact wrench,
open-end 30#
fixed torque
spanner
6. Lift the machine with a hoist,
remove the support device,
and put the machine onto
the ground.
Sling
(12 tons)
P18T00083
P18T00084
P18T00085