LiuGong CLG835H, Service Manual

Page: 622 / 764

7-16
Removal and Installation
January 24, 2017
Removal and installation of hinge assembly CLG835H
9. Install the tooling for
measuring bearing torque
Bearing torque
tooling
10. Measure the torque needed
to rotate upper hinge
bearing, and normal torque
is: 2.3~13.6N.m/ 1.7~10.03
lbf·ft. If the torque is not
within the scope, it can
decrease or increase the
shims to reach normal
rotating torque.
Torque wrench,
18# wrench
11. Install the lower hinge
referring to Steps 4~10.
12. Install the lower hinge
spacer sleeve
Copper bar
13. Measure the torque needed
to rotate lower hinge bear-
ing, and normal torque is:
7.9~22.6N.m/ 5.83~16.67
lbf·ft. If the torque is not
within the scope, it can
decrease or increase the
shims to reach normal rotat-
ing torque.
Torque wrench
Figures Operation instruction Tools
P18S00023
P18S00024