Keysight DSOX3012T, User Manual

Page: 169 / 530

169
Keysight InfiniiVision 3000T X-Series Oscilloscopes
User's Guide
11 Triggers
Adjusting the Trigger Level / 170
Forcing a Trigger / 171
Edge Trigger / 172
Edge then Edge Trigger / 174
Pulse Width Trigger / 175
Pattern Trigger / 178
OR Trigger / 181
Rise/Fall Time Trigger / 182
Near Field Communication (NFC) Trigger / 183
Nth Edge Burst Trigger / 186
Runt Trigger / 188
Setup and Hold Trigger / 190
Video Trigger / 191
Serial Trigger / 203
Zone Qualified Trigger / 204
A trigger setup tells the oscilloscope when to acquire and display data. For
example, you can set up to trigger on the rising edge of the analog channel 1 input
signal.
You can adjust the vertical level used for analog channel edge detection by
turning the Trigger Level knob.
In addition to the edge trigger type, you can also set up triggers on rise/fall times,
Nth edge bursts, patterns, pulse widths, runt pulses, setup and hold violations, TV
signals, and serial signals (if option licenses are installed).
You can use any input channel or the “External Trigger Input" on page 213 BNC as
the source for most trigger types.