Keysight DSOX3012T, User Manual

Page: 7 / 530

Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide 7
In This Guide
This guide shows how to use the InfiniiVision 3000T X-Series oscilloscopes.
When unpacking and using the
oscilloscope for the first time, see:
• Chapter 1 , “Getting Started,” starting on page 27
When displaying waveforms and
acquired data, see:
• Chapter 2 , “Horizontal Controls,” starting on page 63
• Chapter 3 , “Vertical Controls,” starting on page 79
• Chapter 4 , “FFT Spectral Analysis,” starting on page 89
• Chapter 5 , “Math Waveforms,” starting on page 99
• Chapter 6 , “Reference Waveforms,” starting on page
127
• Chapter 7 , “Digital Channels,” starting on page 131
• Chapter 8 , “Serial Decode,” starting on page 149
• Chapter 9 , “Display Settings,” starting on page 155
• Chapter 10 , “Labels,” starting on page 161
When setting up triggers or changing
how data is acquired, see:
• Chapter 11 , “Triggers,” starting on page 169
• Chapter 12 , “Trigger Mode/Coupling,” starting on
page 207
• Chapter 13 , “Acquisition Control,” starting on page
215
Making measurements and analyzing
data:
• Chapter 14 , “Cursors,” starting on page 233
• Chapter 15 , “Measurements,” starting on page 243
• Chapter 16 , “Mask Testing,” starting on page 275
• Chapter 17 , “Digital Voltmeter and Counter,” starting
on page 289
• Chapter 18 , “Frequency Response Analysis,” starting
on page 295
When using the built-in license
enabled waveform generator, see:
• Chapter 19 , “Waveform Generator,” starting on page
301
When saving, recalling, or printing,
see:
• Chapter 20 , “Save/Email/Recall (Setups, Screens,
Data),” starting on page 321
• Chapter 21 , “Print (Screens),” starting on page 335