Keysight DSOX3012T, User Manual

Page: 8 / 530

8 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
When using the oscilloscope's utility
functions or web interface, see:
• Chapter 22 , “Utility Settings,” starting on page 341
• Chapter 23 , “Web Interface,” starting on page 359
For reference information, see: • Chapter 24 , “Reference,” starting on page 375
When using licensed serial bus
triggering and decode features, see:
• Chapter 25 , “CAN/LIN Triggering and Serial Decode,”
starting on page 395
• Chapter 26 , “CXPI Triggering and Serial Decode,”
starting on page 417
• Chapter 27 , “FlexRay Triggering and Serial Decode,”
starting on page 427
• Chapter 28 , “I2C/SPI Triggering and Serial Decode,”
starting on page 437
• Chapter 29 , “I2S Triggering and Serial Decode,”
starting on page 455
• Chapter 30 , “Manchester/NRZ Triggering and Serial
Decode,” starting on page 465
• Chapter 31 , “MIL-STD-1553/ARINC 429 Triggering
and Serial Decode,” starting on page 481
• Chapter 32 , “SENT Triggering and Serial Decode,”
starting on page 497
• Chapter 33 , “UART/RS232 Triggering and Serial
Decode,” starting on page 511
NOTE
Abbreviated instructions for pressing a series of keys and softkeys
Instructions for pressing a series of keys are written in an abbreviated manner. Instructions for
pressing [Key1] , then pressing Softkey2 , then pressing Softkey3 are abbreviated as follows:
Press [Key1] > Softkey2 > Softkey3 .
The keys may be a front panel [Key] or a Softkey . Softkeys are the six keys located directly
below the oscilloscope display.