Keysight DSOX3012T User Manual Download Page 167

Page: 167 / 530

Labels

Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide

167

•

The

Entry knob. Turn the knob to select a key in the dialog; then, push

the

Entry knob to enter it.

•

A connected USB keyboard.

•

A connected USB mouse — you can click anything on the screen that can be

touched.

When you are done entering text, select the dialog's Enter or OK key or press

the

Edit

softkey again.

The annotation text appears in the softkey.

Press the

Text Color

softkey and turn the Entry knob to select the annotation

color.

You can choose white, red, or colors that match analog channels, digital

channels, math waveforms, reference waveforms, or markers.

Press the

Background

softkey and turn the Entry knob to select the annotation

background:

•

Opaque

— the annotation has a solid background.

•

Inverted

— the annotation's foreground and background colors are switched.

•

Transparent

— the annotation has a transparent background.

Summary of Contents for DSOX3012T



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for DSOX3012T

Reviews:

Related manuals for DSOX3012T

Brands by name

Popular brands

Keysight DSOX3012T, User Manual

Search results

Summary of Contents for DSOX3012T

Reviews:

Related manuals for DSOX3012T

Brands by name

Popular brands