Multifors 2 - Parallel Bench-top Bioreactor
Preparations for Use
Page
118
of
211
28 March 2018
Adjusting the position of the impellers
If necessary, adjust the position of the impellers. For this proceed
as follows:
Procedure
1.
Slightly loosen both grub screws using an Allen key – do not
fully unscrew.
2.
Carefully pull the impellers into the desired position.
3.
Carefully tighten both grub screws again.
Replacing the vessel top plate
To replace the vessel top plate onto the vessel and fasten it, pro-
ceed as follows:
NOTICE!
The following pictures show an empty vessel for
bacterial cultures and are for general understand-
ing.
Procedure
1.
Carefully replace the vessel top plate onto the glass vessel.
