Multifors 2 - Parallel Bench-top Bioreactor
Preparations for Use
28 March 2018
Page
147
of
211
2.
Hold the vessel holder and support frame on both hand grips
and replace it around the thermal blocks from the top.
3.
Engage the vessel retaining brackets, i.e. release the clamps
of the snap closure between the thermal blocks.
For this, hold both clamps, pressing the left-hand clamp in-
wards at the same time.
NOTICE!
Do not pull the right-hand clamp forwards!
4.
Pull the mounting plate with the pump heads out of the bottom
part of the vessel holder and support frame.
5.
Plug the mounting plate with the pump heads onto the pump
motor drive shafts on the basic unit.
