Multifors 2 - Parallel Bench-top Bioreactor
Preparations for Use
28 March 2018
Page
123
of
211
3.
Screw the sensor into the support guide.
4.
Insert the sensor into the threaded collar with the thread point-
ing in the downward direction.
5.
Fit the fork of the rod into the groove of the threaded collar.
6.
Push the threaded collar and the rod together upwards and in-
sert the rod into the hole of the support guide.
7.
Fit an O-Ring to the sensor.
8.
Insert the sensor into the port.
9.
Adjust the sensor to the desired height.
