Multifors 2 - Parallel Bench-top Bioreactor
Preparations for Use
Page
124
of
211
28 March 2018
10.
Screw in an tighten the sensor using the threaded collar.
11.
Completely tighten the grub screw in the support guide with
the key.
: pH!
FINALLY
Cover connectors of the sensors from the manufacturer METTLER
with a little aluminium foil.
CAUTION!
Risk of damage to HAMILTON sensors!
The contacts of the sensors from the manufacturer
HAMILTON
may be damaged when their connect-
ors are covered with aluminium foil during autoclav-
ing!
