IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 77 / 402

Ÿ
The default username (USERID) and password
(PASSW0RD)
Note
The default username and password is case
sensitive. You must use all caps, and the
“0” in PASSW0RD, is the numeral zero.
Ÿ
A username and password that you define using
the Advanced System Management service and
Netfinity Manager
Important
If you update the system management processor
microcode, the default username (USERID) and
password (PASSW0RD) are reset. If applicable,
notify the system administrator.
When you have logged into the system management
processor, the following main menu appears:
2 Monitors
3 Error Logs
4 Service Processor Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
3. Select 6 System Power.
The following System Power menu appears:
1 Current Power Status
2 Power Configuration
3 Power On
4 Power Off
4. Select a System Power menu item.
Ÿ
Select 1 Current power Status for information
about the current server power status.
Ÿ
Select 2 Power Configuration for information
about the server power configuration.
Ÿ
Select 3 Power On to power the server on (if it
is currently powered off).
Ÿ
Select 4 Power Off to power the server off (if it
is currently powered on).
Boot menu selections:
You can use the selections
available from the Boot menu to:
Ÿ
Shutdown the server operating system and then
restart the server
Ÿ
Restart the server immediately, without first
performing an operating system shutdown
Ÿ
Restart the system management processor
Netfinity 5500 - Type 8660
69