IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 185 / 402

hot-plug PCI slot.) Make sure that the Power light
.5/
for the hot-plug PCI slot is on.
11. If you have other options to install or remove, do so
now; otherwise, go to “Completing the installation” on
page 154.
Installing a non-hot-plug adapter
This section
gives the procedure for installing a non-hot-plug adapter.
If you want to remove a non-hot-plug adapter, reverse the
steps.
Before you begin:
Ÿ
Read “Safety information” on page 308.
Ÿ
Read the documentation that comes with the
option.
Refer to the following illustration while you perform the
steps in this procedure.
.1/
Expansion-slot cover screw
.2/
Expansion-slot cover
.3/
Adapter
.4/
Adapter retention latch
To install a non-hot-plug adapter:
.
1. Turn off the server and peripheral devices and
disconnect all external cables and power cords (see
Netfinity 5500 - Type 8660
177