IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 52 / 402

Rebuild Physical Drive
Select OK to make the drive in
channel 1 bay 5 the destination of
the rebuild, or select another drive
for the destination of the build
OK
Cancel
3. Select a RDY drive on which to store the
reconstructed data, or click on OK to use the same
bay if you have physically replaced the drive.
Note
The replacement hard disk drive must be the
same size or larger than the failed drive.
4. The rebuild process begins and reports progress
information on the screen.
Adapter 1 Rebuild Progress
Log Drv 0
Log Drv 1
Log Drv 2
Log Drv 3
Log Drv 4
Log Drv 5
Log Drv 6
Log Drv 7
53%
Notes:
1. Only one Rebuild operation can take place at a time.
2. The Rebuild operation changes the hard disk drive
state from DDD to RBL if the array contains a CRT
logical drive. After the Rebuild operation completes,
the hard disk drive state changes from RBL to ONL.
(When you rebuild to a RDY drive, the DDD drive is
removed from the array and the state of the DDD
drive is changed to defunct hot-spare (DHS).)
3. If multiple hot-spare (HSP) drives are available, the
ServeRAID controller searches all the bays on each
channel for a hot-spare drive of the appropriate size
and the first appropriate hot-spare drive found enters
the Rebuild (RBL) state.
4. If a hot-spare (HSP) drive is available, a Rebuild
operation starts automatically.
44
Netfinity Server HMM