IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 65 / 402

Configuring options
Before installing a new device or program, read the
documentation that comes with it. Reading the instructions
helps you to determine the steps that are required for
installation and configuration. The following list provides a
preview of the actions that might be required to configure
the server.
1. Run the Configuration/Setup Utility program and
record the current configuration settings.
See “Configuration/Setup Utility program” on page 60.
2. Set jumpers or switches on the server system board.
See “Changing jumper positions” on page 151 and
“System board jumpers” on page 257.
3. Set jumpers or switches on the device.
See the instructions that came with the adapter.
4. Install the adapter in the server.
See “Adapters” on page 142.
5. Install software programs.
See the installation instructions that came with the
software.
6. Resolve configuration conflicts.
See “Resolving configuration conflicts” on page 73.
Netfinity 5500 - Type 8660
57