IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 146 / 402

3. If you have more than one ServeRAID controller
installed, a selection screen appears. Use the Up
Arrow (
↑
) or Down Arrow (
↓
) key to select your
choice; then, press Enter. Otherwise, the Main Menu
of the Mini-Configuration program appears, similar to
the following screen.
Select the choice using the Up Arrow ( ) & Down Arrow ( ) keys, then press Enter.
IBM ServeRAID Controller Disk Array Mini-Configuration Ver. X.XX
Main Menu
View Adapter Status
View Configuration
Advanced Functions
Exit
Descriptions of the choices available from the Main
Menu are as follows:
Ÿ
View Adapter Status displays the current status
of the ServeRAID controller. (See “Viewing the
ServeRAID II controller status” on page 139.)
Ÿ
View Configuration displays the current
configuration information for the ServeRAID
controller. (See “Viewing the configuration” on
page 140.)
Ÿ
Advanced Functions lets you initialize the
configuration (that is, reset the ServeRAID
controller settings to their factory defaults),
import the configuration from drives, enable and
disable the Boot CD-ROM and INT13
extensions, and view the controller and PCI
information. (See “Using the Advanced
Configuration functions” on page 89.)
4. Use the Up Arrow (
↑
) or Down Arrow (
↓
) key to
highlight your choice; then, press Enter.
5. Follow the instructions that appear on the screen.
6. Select Exit to leave the Main Menu.
138
Netfinity Server HMM