IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 82 / 402

ServeRAID Configuration program
You can use the IBM ServeRAID Configuration program to
view the current disk-array configuration, change or delete
existing arrays, create and initialize new disk arrays, and
perform many other configuration and maintenance tasks.
You must use the ServeRAID Configuration program or the
EZ-RAID configuration feature to configure the disk arrays
before you partition the hard disk drives and install the
operating system. After you configure the disk arrays, use
the information provided in the ServerGuide package to
install the operating system. Then, return to this manual
for information about installing and using the ServeRAID
Administration and Monitoring utility program.
Software installation
Use ServerGuide to verify that you have the proper
working environment for the specific operating system you
are installing.
1. Follow the instructions provided in the ServerGuide
package to install the operating system.
What to do next?
Ÿ
To install application programs, refer to the
application program documentation.
74
Netfinity Server HMM