IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 31 / 402

4. Continue with “Using the Server Utility Programs”
on page 23.
Ÿ
From a client workstation on the network:
1. Insert the
IBM ServeRAID Device Driver Diskette
into a diskette drive, such as drive a:.
2. Type:
copy a:\remote\servers\netware\ipsadm.nlm
f:\system\ipsadm.nlm
(where a: is the diskette drive letter and f is the
SYS volume)
3. Load the NLM from the system console. Type:
load ipsadm.nlm
4. Continue with “Using the Server Utility
Programs.”
SCO OpenServer Server Utility Program:
The
SCO OpenServer Server utility program is installed from
the
SCO Open Server Boot-Time Loadable (BTLD)
Diskette during the installation of the IBM ServeRAID
device driver. The file is installed in the /usr/bin directory.
To run the program, type ipsadm & at the command
prompt.
If the program does not run, use the following
instructions to manually install the SCO OpenServer
5.X utility program.
1. Insert the IBM ServeRAID SCO Open Server
Boot-Time Loadable (BTLD) Diskette into a diskette
drive.
2. Create a directory for the server utility. Type:
mkdir /ipsraid
3. Mount the diskette drive. Type:
mount /dev/fdð /mnt
4. Copy the following file. Type:
cp /mnt/ipsraid/new/usr/bin/ipsadm /ipsraid/ipsadm
5. Unmount the diskette drive. Type:
umount /mnt
6. To start the server utility to run in the background,
type:
./ipsadm &
7. Continue with “Using the Server Utility Programs.”
Using the Server Utility Programs:
You can
use command-line parameters to customize the
ServeRAID programs.
To use command-line parameters, issue the IPSADM
command in the following format:
IPSADM
<
parameter 1
> <
parameter 2
>
...
<
parameter n
>
Netfinity 5500 - Type 8660
23