IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 183 / 402

.1/
Tab
.2/
Adapter retention latch
.7/
Adapter
.8/
Adapter retention latch
To install a hot-plug PCI adapter:
1. Remove the top cover (see “Top cover removal” on
page 262).
2. Determine which expansion slot you will use for the
adapter.
Note
Only PCI slots 1–4 can be used for hot-plug PCI
adapters.
3. Disable the selected PCI slot from the operating
system. (Refer to the documentation that comes with
the operating system for information about disabling a
hot-plug PCI slot.) Disabling the PCI slot turns off the
Power light for that PCI slot.
Attention
Make sure the Power light
.5/
for the hot-plug
PCI slot is off before you continue to the next
step.
4. Remove the expansion-slot cover
.3/
:
a. Rotate the adapter retention latch
.2/
counterclockwise.
Netfinity 5500 - Type 8660
175