IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 50 / 402

A screen similar to the following appears.
Add Physical Drive(s) to Array
Options:
Logical
Drive
Raid
Level
Size
(MB)
New Size
(MB)
Increase the capacity of all logical drives in array B
0
1
2
5
0
5
1000
498
300
1500
664
450
OK
Cancel
5. Select one of the available options for expansion from
the pull-down list.
The screen shows a list of the affected logical drives
with their new sizes.
6. Click on OK.
Physical device administration:
This section
contains instructions for setting physical device states and
rebuilding drives using the ServeRAID Administration and
Monitoring utility program.
Setting Physical device states:
Physical devices
always appear in one of the following defined states, but
you can easily redefine them into another state.
The following table shows the valid device states and valid
alternative states.
Device States Alternate States
EMP RDY SBY
SBY RDY EMP HSP SHS
DHS EMP HSP SHS
SHS HSP DHS
DDD ONL RBL
RDY EMP HSP SHS SBY
HSP RDY SHS DHS
ONL DDD
RBL DDD ONL
To change the physical device state:
1. Select the device from the Main Screen of the
Administration and Monitoring utility program. A
screen similar to the following appears.
42
Netfinity Server HMM