IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 98 / 402

Press any key to continue.
IBM ServeRAID Adapter Disk Array Mini-Configuration Utility Ver. X.XX
CB80h
9A00h
1
0009h
F400h
FDFFE000h
00h
0Eh
0009E814h
0009E82Ch
0009E818h
0009E814h
4800h
01K8562
Code Seg.(Cs):
Data Seg.(Ds):
Adapter No:
Intr No:
I/O Adr:
Mem Adr:
Bus No:
Device No:
StatusQ Start:
StatusQ End:
StatusQ Head:
Status Tail:
OS/2 Table:
Part Number:
Adapter Information PCI Reg Information
002Eh 1014h
0200h 0107h
010000h 04h
00h 00h 40h 08h
0000F401h
FDFFE000h
00000000h
00000000h
00000000h
00000000h
00000000h
00000000h
00000000h
00000000h
00000000h
00h 00h 00h 00h
Dev, Ven Id (00h):
Status, Cmd(04h):
Class, Rev Id(08h):
Bist,Hdr,Lat,Cach (0Ch):
Base Adr Reg0(10h):
Base Adr Reg1(14h):
Base Adr Reg2(18h):
Base Adr Reg3(1Ch):
Base Adr Reg4(20h):
Base Adr Reg5(24h):
Reserved(28h):
Reserved(2Ch):
Exp ROM Adr(30h):
Reserved (34h):
Reserved(38h):
MaxLat,MinG,IntP,Intl(3Ch):
Setting the BootCd feature:
When you select
Boot CD-ROM and INT13 Extensions, a screen similar to
the following appears.
Select a choice using the Up and Down Arrow keys, then press Enter.
Boot CD-ROM Configuration
BIOS Support for Bootable CD-ROM No
Display Boot CD-ROM Menu No
BIOS Support for Int13 Extensions No
BIOS Support for reading Partition tables Yes
BIOS Support for Service Processor No
Save Configuration in Adapter
Exit
IBM PC ServeRAID Adapter Disk Array MiniConfiguration Utility Ver. X.XX
To enable the BootCd feature:
1. Use the Up Arrow (
↑
) or Down Arrow (
↓
) key to
highlight BIOS Support for Bootable CD-ROM.
Press Enter to change No to Yes. This also changes
No to Yes next to Display Boot CD-ROM Menu and
BIOS Support for INT13 Extensions.
2. Ensure that the screen displays Yes next to BIOS
Support for reading Partition tables. If not, use the
Up Arrow (
↑
) or Down Arrow (
↓
) key to highlight BIOS
Support for reading Partition tables; then, press
Enter to change No to Yes.
3. Highlight Save Configuration for Adapter; then,
press Enter. A Configuration Saved message
appears. The Main Menu of the Mini-Configuration
program returns.
Note
Highlighting Exit, instead of Save Configuration
for Adapter, and pressing Enter causes any
changes you made not to be saved.
4. Press Ctrl
+
Alt
+
Del to restart the server.
90
Netfinity Server HMM