IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 155 / 402

Battery replacement
Note
If the battery is remover, the stand by light will not
blink until after the first completion of the POST.
IBM has designed this product with your safety in mind.
The lithium battery must be handled correctly to avoid
possible danger. If you replace the battery, you must
adhere to the following instructions.
Caution
When replacing the battery, use only IBM Part
Number 33F8354 or an equivalent type battery
recommended by the manufacturer. If the system has
a module containing a lithium battery, replace it only
with the same module type made by the same
manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
Ÿ
Throw or immerse into water
Ÿ
Heat to more than 100°C (212°F)
Ÿ
Repair or disassemble
Dispose of the battery as required by local ordinances
or regulations.
Note
In the U.S., call 1-800-IBM-4333 for information about
battery disposal.
If you replace the original lithium battery with a
heavy-metal battery or a battery with heavy-metal
components, be aware of the following environmental
consideration. Batteries and accumulators that contain
heavy metals must not be disposed of with normal
domestic waste. They will be taken back free of charge by
the manufacturer, distributor, or representative, to be
recycled or disposed of in a proper manner.
To order replacement batteries, call 1-800-772-2227 within
the United States, and 1-800-465-7999 or 1-800-465-6666
within Canada. Outside the U.S. and Canada, call your
IBM reseller or IBM marketing representative.
Netfinity 5500 - Type 8660
147